HOME PRODUCTS CONTACT REQUEST A QUOTE SITE MAP

Non-Asbestos & Mechanical Packing

mechanical and non asbestos packing

NON-ASBESTOS

KlingersilŽ C-4300

Non-Asbestos sheeting made with synthetic fibers and a nitrile binder with good sealability and good chemical resistance. This is a good general-purpose sheet.

High Temperature Max 700°F
Low Temperature 0°F
PSI Range 1150
Compressibility 10%

KlingersilŽ C-4401

Non-Asbestos sheeting made with synthetic fibers and a nitrile binder with excellent sealability and excellent chemical resistance. This sheet has good creep relaxation and is a good general-purpose sheet.

High Temperature Max 750°F
Low Temperature 0°F
PSI Range 1400
Compressibility 7%

KlingersilŽ C-4433

Non-Asbestos sheeting made with fiberglass, aramid & inorganic fibers for an ultimate steam sheet. This has outstanding load bearing with excellent creep relaxation and is the best general-purpose sheet.

High Temperature Max 775°F
Low Temperature 0°F
PSI Range 1500
Compressibility 7%

Klinger Flexible Graphite HL

HL is standard industrial grade graphite sheeting with superior chemical resistance. Graphite is highly compressible & compactable allowing for low gas permeability with low electrical resistance.

High Temperature Max 900°F
Low Temperature 0°F
PSI Range 2100
Compressibility 40 - 50%

Klinger Flexible Graphite SLS

SLS is graphite adhesively bonded to a .002” 316 stainless steel foil. Graphite is highly compressible & compactable allowing for low gas permeability with low electrical resistance and has excellent anti-stick properties.

High Temperature Max 900°F
Low Temperature 0°F
PSI Range 2100
Compressibility 40 - 50%

Klinger Flexible Graphite  PSM

PSM is graphite mechanically clinched to a .004” 316 stainless steel tang core. Graphite is highly compressible & compactable allowing for low gas permeability with low electrical resistance and has excellent anti-stick properties.

High Temperature Max 900°F
Low Temperature 0°F
PSI Range 2100
Compressibility 40 - 50%

Klinger Soft-Chem™

Soft-Chem is an expanded PTFE material with excellent resistance to chemical attack and virtually eliminates the corrosive effects of gas and liquid permeation. It has superior creep resistance and sealability for all types of sealing applications.

High Temperature Max 900°F
Low Temperature 0°F
PSI Range 2100
Compressibility 40 - 50%

DurlonŽ 8400

Durlon 8400 gold has the widest range of chemical resistance of any compressed non-asbestos material today. It is designed for high ph applications found in pulp & paper, chemical processing and power generation industries.

High Temperature Max 800°F
Low Temperature -100°F
PSI Range 1500
ph Range 2 - 13

DurlonŽ 8500

Durlon 8500 green is a general-purpose sheet containing aramid and inorganic fibers providing excellent results in steam, hydrocarbons, and new refrigerants.

High Temperature Max 700°F
Low Temperature -100°F
PSI Range 1500
ph Range 3 - 11

DurlonŽ 9000

Durlon 9000 blue is a filled PTFE blend material used in process piping and equipment in chemical, pulp and paper, pharmaceutical, oxygen and industrial gases, food and beverage where non-contamination and resistance to highly aggressive chemicals are required.

High Temperature Max 520°F
Low Temperature -350°F
PSI Range 550
ph Range 0 - 14

DurlonŽ 9400

Durlon 9400 black is made from PTFE resins, carbon fillers for use in piping, equipment in chemical, pharmaceutical, food, and other severe service applications where chemical resistance and sealability are paramount.

High Temperature Max 550°F
Low Temperature -350°F
PSI Range 1700
ph Range 0 - 14


View Our Full Line Card

back to top



MECHANICAL PACKING

All of our mechanical packings are made of asbestos-free materials. The packing are made for Pulp & Paper, Power Plants, Chemical, Wastewater Treatment, Valves, Boiler Feed, Oil & Refinery and Steam. The types of material they are made from are Synthetic, Acrylic, TFE, Kevlar, Graphite Filament, Grafoil Ribbon, Asbestos-Free Plastic, and Asbestos-Free Metallic.

387I

A round braided jacket of inconel wire inserted "S2" fiberglass over a specially designed extruded core containing chopped S2 fibers, graphitic binders plus corrosion inhibitors. An external coating of colloidal graphite dispersion is added, therefore providing a highly lubricated sealing surface and protective coating.

Steam valves, soot blowers, expansion joints, coupling gaskets or static seal where temperature and pressure are a concern.

High Temperature Max 1200°F
Pressure 4300
Speed  
ph Range 4 - 8

G-58

Style G58 is a special braided flexible graphite for use as end rings or complete sealing rings in valve or pump applications for high or low pressures and temperatures. Offering excellent sealability, reduced volume loss, corrosion resistance, lubricity and heat dissipation.

Constructed from high temperature glass fiber reinforced flexible graphite yarns.

High Temperature Max 850°F
Pressure 300 to 4300
Speed 4000 FPM
ph Range 0 - 14

1330

Style 1330 is a braided synthetic fiber packing thoroughly impregnated with PTFE to enhance its chemical resistance, comformability, lubricity and sealability while retaining flexibility and resilience. Interlaced braided with PTFE dispersion.

For medium to high speed rotary shaft applications handling a wide variety of services including mild acids, and alkalies, solvents, water, steam, etc., in rotary or reciprocating pumps as well as valves.

High Temperature Max 500°F
Pressure 300 to 1000
Speed 2250 FPM
ph Range 3 - 11

1340

Style 1340 is a excellent general service packing braided from synthetic fiber thoroughly impregnated with petroleum based lubricants plus an exterior graphite coating for ease of start up, lubricity, and gland adjustment.

Interlaced braided acrylic yarns with graphite and petroleum base lubricants.

High Temperature Max 500°F
Pressure 300 to 1000
Speed 2000 FPM
ph Range 4 - 11

K-1730

Style K1730 is a high strength abrasion resistant aramid packing. Especially suited for abrasive media service. Interlace braided aramid filament yarns containing PTFE and break in lubricant.

For medium speed rotary equipment, plunger and gear pumps where a high tensile, abrasion resistant but resilient packing is required. Handles a wide variety of services including mild acids and caustics, slurry, water and solvents.

High Temperature Max 500°F
Pressure 300 to 1000
Speed 2000 FPM
ph Range 2 - 12

1625-G

Style 1625G is a premium grade graphitic packing designed for severe service. This high tensile, chemical resistant material is ideal for the most difficult fluid handling applications that the chemical, petrochemical, power generation and/or other related industries have to offer. Ideal for high or low pressures and temperatures, while maintaining adjustability, conformity, flexiblity and excellent heat dissipating characteristics. Style 1625G meets or exceeds specifications where 100 ppm (or less) leachable chlorides are required.

High Temperature Max 650°F
Pressure 500 to 4300
Speed 3200 FPM
ph Range 0 - 14

C-1056

Style C1056 is a resilient FDA compliant PTFE packing with an external lubrication. All ingredients contained in this style are in compliance with the Food and Drug Administration requirements. Ideal selection for use the food, chemical and pharmaceutical industries. Interlace braided PTFE filament yarn with external lubricant.

Valve and rotary equipment specifically requiring the use of a FDA compliant material.

High Temperature Max 500°F
Pressure 300 to 2500
Speed 2000 FPM
ph Range 0 - 14

C-1045

Style C1045 is a tightly braided PTFE packing thoroughly impregnated with a PTFE dispersion filling all voids therefore preventing leakage through its braided structure. Ideal for high pressure chemical or corrosive situations. Interlace braided 100% PTFE filament yarn containing a PTFE dispersion.

For use on valve stems, rotary or reciprocating services handling all chemicals, gases and solvents except molten metals.

High Temperature Max 500°F
Pressure 300 to 2500
Speed 2000 FPM
ph Range 0 - 14

C-1065

Style C1065 is a general all purpose braided graphited "PTFE" packing containing a silicone lubricant servicing a wide range of chemical and temperature applications in the valve and pump industries. In addition to its resilience, it maintains dimensional stability while displaying excellent heat dissipating properties and extrusion resistance characteristics. Interlace braided from graphite impregnated expanded PTFE yarns containing a high temperature silicone break-in lubricant.

Rotary, centrifugal and plunger pumps as well as valves servicing solvents, acids, chemicals and similar services. Also used in other type rotating and/or static applications where chemical resistance and heat are a factor.

High Temperature Max 500°F
Pressure 300 to 2500
Speed 3000 FPM
ph Range 0 - 14


View Our Full Line Card